COMMERCIAL | INDUSTRIAL HEATERS

Spartan Economical Radiant Tube Heaters

THE SPARTAN

High-Efficiency Radiant Tube Heaters
Single and Two Stage
The perfect economical option for your commercial or industrial space, larger shops and garages, and more! Enjoy the most comfortable, cost-effective, and fuel-efficient source of heat available with the Spartan Radiant Tube Heater. Keep reading to learn more about Bryz Enterprise LTD, one of the most reliable heating equipment suppliers.

Reduce Your Fuel Costs By 50% Or More!

THE BURNER

  • Burners from 60,000 to 200,000 BTUH, in lengths from 12' to 72'.
  • Single and two-stage models are available.
  • Reliable electronic hot surface ignition.
  • Factory ready to accept either 24V or 120V controls.
  • Built with 100% North American-made electronic controls.
  • Flame observation port to visually observe combustion.
  • Straight runs, U models, and custom configurations are available with the use of 90 and 180-degree elbow kits.
  • Natural gas and propane-fired models are built to order, with no field conversions required.
  • Continuous combustion monitoring with three to five ignition trials before 100% safety lockout.
  • Dual air-proving switches monitor combustion air and exhaust airflow for safety.
  • Totally enclosed blower motor with internal thermal overload protection. The blower motor is externally mounted for easy accessibility and to simplify intake air connection (a 4" combustion air intake duct adapter comes standard).

THE RADIANT TUBE

  • Emitter tubes are 4" diameter, 16 gauge North American steel.
  • Secondary tubes constructed of 16 gauge carbon steel for high emissivity.
  • Primary combustion tube made of high temperature, high emissivity specialty alloy.
  • Emitter tubes are provided with a 20-year burnout guarantee.
  • Swedged tube for ease of installation - no couplers or clamps required at joints.

THE REFLECTORS

  • Highly efficient, wide-angled aluminum reflectors - engineered to reflect maximum radiant energy over the largest effective area possible.
  • Steel hangers with suspension points for both flat and angle mounting of reflectors.
  • Highly polished material for increased reflectivity.
  • Side reflectors and arena reflectors are available.

SPECIFICATIONS AT A GLANCE

STRAIGHT MODEL SPECIFICATIONS AND CLEARANCES
"U" MODEL SPECIFICATIONS AND CLEARANCES
200,000 BTUH input is available in NG only. The maximum input is 180,000 BTUH for LP.

Clearances "below" on straight models can be reduced by 40%, 15ft. downstream of the burner. 200,000 BTU is not available for high altitudes. For installations over 2000', all burners must be derated by 4% for every 1000' of elevation over sea level.

Comfortzone Premium Radiant Tube Heaters

The ComfortZone

THE BURNER

  • Burners from 60,000 to 200,000 BTUH, in lengths from 12' to 72'.
  • Flame observation port to visually observe combustion.
  • Factory ready to accept either 24V or 120V controls.
  • Single and two-stage models are available.
  • Reliable electronic hot surface ignition.
  • Built with 100% North American-made electronic controls.
  • Straight runs, U models, and custom configurations are available with the use of 90 and 180-degree elbow kits.
  • Natural gas and propane-fired models are built to order, with no field conversions required.
  • Continuous combustion monitoring with three to five ignition trials before 100% safety lockout.
  • Dual air-proving switches monitor combustion air and exhaust airflow for safety.
  • Totally enclosed blower motor with internal thermal overload protection. The blower motor is externally mounted for ease of accessibility and to simplify intake air connection (a 4" combustion air intake duct adapter comes standard).

THE RADIANT TUBE

  • Emitter tubes are 4" diameter, 16 gauge North American steel.
  • Emitter tubes are provided with a 20-year burnout guarantee.
  • Secondary tubes constructed of 16 gauge carbon steel for high emissivity.
  • Primary combustion tube made of high temperature, high emissivity specialty alloy.
  • Swedged tube for ease of installation - no couplers or clamps required at joints.

THE REFLECTORS

  • Highly efficient, wide-angled aluminum reflectors - engineered to reflect maximum radiant energy over the largest effective area possible.
  • Steel hangers with suspension points for both flat and angle mounting of reflectors.
  • Highly polished material for increased reflectivity.
  • Side reflectors and arena reflectors are available.
Middleman the Ultimate in Even Heat

The Middleman

THE BURNER

  • Burners from 90,000 to 120,000 BTUH, in lengths from 22' to 62'.
  • Reliable electronic hot surface ignition.
  • Built with 100% North American-made electronic controls.
  • Flame observation port to visually observe combustion.
  • The center-fired burner reduces temperature variance from end to end, providing even heat distribution.
  • Straight runs, U models, and custom configurations are available with the use of 90 and 180-degree elbow kits.
  • Natural gas and propane-fired models are built to order, with no field conversions required.
  • Continuous combustion monitoring with three ignition trials before 100% safety lockout.
  • Dual air-proving switches monitor combustion air and exhaust airflow for safety.
  • Factory ready to accept either 24V or 120V controls.
  • Totally enclosed blower motor with internal thermal overload protection. The blower motor is externally mounted for ease of accessibility and to simplify intake air connection (a 4" combustion air intake duct adapter comes standard).

THE RADIANT TUBE

  • Emitter tubes are 4" diameter, 16 gauge North American steel.
  • Emitter tubes are provided with a 20-year burnout guarantee.
  • Primary combustion tube made of high temperature, high emissivity specialty alloy.
  • Secondary tubes constructed of 16 gauge carbon steel for high emissivity.
  • Swedged tube for ease of installation - no couplers or clamps required at joints.

THE REFLECTORS

  • Highly efficient, wide-angled aluminum reflectors - engineered to reflect maximum radiant energy over the largest effective area possible.
  • Steel hangers with suspension points for both flat and angle mounting of reflectors.
  • Highly polished material to provide the absolute best in reflectivity.
  • Side reflectors and arena reflectors are available.
Comfortzone Carwash Moisture Resistant Tube Heaters

The ComfortZone Carwash

THE BURNER

  • Burners from 60,000 to 200,000 BTUH, in lengths from 12' to 72'.
  • Reliable electronic hot surface ignition.
  • Built with 100% North American-made electronic controls.
  • Flame observation port to visually observe combustion.
  • Straight runs, U models, and custom configurations are available with the use of 90 and 180-degree elbow kits.
  • ComfortZone Carwash models are equipped with a stainless steel control housing. Single and two-stage models are available.
  • ComfortZone Carwash models are fitted with an operating indicator LED for quick and easy visual confirmation of operation from the ground.
  • Natural gas and propane-fired models are built to order, with no field conversions required.
  • Continuous combustion monitoring with three to five ignition trials before 100% safety lockout.
  • Dual air-proving switches monitor combustion air and exhaust airflow for safety.
  • Factory ready to accept either 24V or 120V controls.
  • Totally enclosed blower motor with internal thermal overload protection. The blower motor is externally mounted for ease of accessibility and to simplify intake air connection (a 4" combustion air intake duct adapter comes standard).

THE RADIANT TUBE

  • Emitter tubes are 4" diameter, 16 gauge North American steel.
  • Secondary tubes constructed of 16 gauge carbon steel for high emissivity.
  • Primary combustion tube made of high temperature, high emissivity specialty alloy.
  • Swedged tube for ease of installation - no couplers or clamps required at joints.
  • Emitter tubes are provided with a 20-year burnout guarantee.

THE REFLECTORS

  • Highly efficient, wide-angled aluminum reflectors - engineered to reflect maximum radiant energy over the largest effective area possible.
  • Upgraded near mirror finish on all ComfortZone models for increased reflectivity and efficiency.
  • Steel hangers with suspension points for both flat and angle mounting of reflectors.
  • Side reflectors and arena reflectors are available.
High Intensity Spot Heating & Heat Recovery

HIGH INTENSITY

Single and Two Stage

THE HEATER

  • Burners from 30,000 to 200,000 BTUH (30-35k BTUH not available in Canada).
  • Natural gas and propane-fired models are built to order, with no field conversions required.
  • Single and two-stage models are available.
  • Reliable electronic direct spark ignition.
  • Millivolt controls available - no power required.
  • Continuous combustion monitoring with 100% safety lockout.
  • Factory ready to accept either 24V or 120V controls.

HIGH-INTENSITY HEAT

At the heart of the high-intensity heater is an atmospheric type, 100% primary air burner utilizing a perforated ceramic combustion surface. The flame causes the ceramic surface to reach an incandescent temperature of approximately 1700° to 1850°F.

A high rate of infra-red energy is generated and directed to where it is needed.

APPLICATIONS

High-intensity units excel in situations where large amounts of direct, focused heat energy are required. Spot heating and heat recovery are some common high-intensity applications.

The compact size of the units also allows them to be used in areas where other heating equipment might not fit.

RESIDENTIAL GARAGE | WORKSHOP HEATERS

EZ DUZZIT the Ultimate Garage & Shop Heater

the EZ-DUZZIT

THE BURNER

  • Reliable electronic hot surface ignition.
  • Built with 100% North American made electronic controls.
  • Continuous combustion monitoring with three to five ignition trials before 100% safety lockout.
  • Dual air proving switches monitor combustion air and exhaust airflow for safety.
  • Totally enclosed blower motor with internal thermal overload protection. Blower motor is externally mounted for ease of accessibility and to simplify intake air connection (4″ combustion air intake duct adapter comes standard).
  • Flame observation port to visually observe combustion.
  • Factory ready to accept either 24V or 120V controls.

THE RADIANT TUBE

  • Primary combustion tube made of high temperature, high emissivity specialty alloy.
  • Emitter tubes are 3.5″ diameter, 16 gauge North American steel.
  • Secondary tubes constructed of 16 gauge carbon steel for high emissivity.
  • Emitter tubes provided with a 20 year burnout guarantee.
  • Swedged tube for ease of installation – no couplers or clamps required at joints.

THE REFLECTORS

  • Highly efficient, wide-angled aluminum reflectors - engineered to reflect maximum radiant energy over the largest effective area possible.
  • Steel hangers with suspension points for both flat and angle mounting of reflectors.
  • Highly polished material for increased reflectivity.
  • Side reflectors and arena reflectors are available.
The Heatwave Sleek, Compact, Perfect for Tight Spaces

THE HEATWAVE

THE BURNER

40,000 BTUH

  • Natural gas (model GH40N) and propane (model GH40P) fired models built to order with no field conversions required.
  • Continuous combustion monitoring with three to five ignition trials before 100% safety lockout.
  • Reliable electronic hot surface ignition.
  • Built with 100% North American-made electronic controls.
  • Flame observation port to visually observe combustion.
  • Factory ready to accept either 24V or 120V controls.
  • Totally enclosed blower motor with internal thermal overload protection. The blower motor is externally mounted for ease of accessibility and to simplify intake air connection (a 4" combustion air intake duct adapter comes standard).
  • Dual air-proving switches monitor combustion air and exhaust airflow for safety.

THE RADIANT TUBE

  • Emitter tubes are 3" diameter, 16 gauge North American steel.
  • Emitter tubes are provided with a 20-year burnout guarantee.
  • Primary combustion tube made of high temperature, high emissivity specialty alloy.
  • Secondary tubes constructed of 16 gauge carbon steel for high emissivity.
  • Swedged tube for ease of installation - no couplers or clamps required at joints.

THE REFLECTORS

  • Highly efficient, wide-angled aluminum reflectors - engineered to reflect maximum radiant energy over the largest effective area possible.
  • Steel hangers with suspension points for both flat and angle mounting of reflectors.
  • Highly polished material for increased reflectivity.

The Heatwave

  • Black and stainless steel finishes are available.
  • Industry best 4-year warranty.
  • Manual push-button piezo ignition and 24V direct spark ignition options are available.
  • Natural gas and propane-fired models are built to order, with no field conversions required.
  • Provides coverage over a 20' diameter (approx. 325 sq ft.).
  • A wide variety of models with versatile options for almost any application.

THE BURNER

  • 50,000 BTUH provides ample heat over a generous pattern of heat distribution.
  • Manufactured in Canada, made with quality North American materials and components.

THE REFLECTOR

  • Solid spun high polish aluminum 34" reflector for maximum heat pattern - the result of extensive testing and research.
  • Highly polished material to provide the absolute best in reflectivity.

AGRICULTURAL HEATERS

Middleman Brooder the Ultimate in Even Heat

The Middleman Brooder

THE BURNER

  • Burners from 90,000 to 120,000 BTUH, in lengths from 22' to 62'.
  • Built with 100% North American-made electronic controls.
  • Reliable electronic hot surface ignition.
  • Flame observation port to visually observe combustion.
  • The center-fired burner reduces temperature variance from end to end, providing even heat distribution.
  • Straight runs, U models, and custom configurations are available with the use of 90 and 180-degree elbow kits.
  • Natural gas and propane-fired models are built to order, with no field conversions required.
  • Continuous combustion monitoring with three ignition trials before 100% safety lockout.
  • Dual air-proving switches monitor combustion air and exhaust airflow for safety.
  • Factory ready to accept either 24V or 120V controls.
  • Totally enclosed blower motor with internal thermal overload protection. The blower motor is externally mounted for ease of accessibility and to simplify intake air connection (a 4" combustion air intake duct adapter comes standard).

THE RADIANT TUBE

  • Emitter tubes are 4" diameter, 16 gauge North American steel.
  • Emitter tubes are provided with a 20-year burnout guarantee.
  • Primary combustion tube made of high temperature, high emissivity specialty alloy.
  • Secondary tubes constructed of 16 gauge carbon steel for high emissivity.
  • Swedged tube for ease of installation - no couplers or clamps required at joints.

THE REFLECTORS

  • Highly efficient, wide-angled aluminum reflectors - engineered to reflect maximum radiant energy over the largest effective area possible.
  • Steel hangers with suspension points for both flat and angle mounting of reflectors.
  • Highly polished material to provide the absolute best in reflectivity.
  • Side reflectors and arena reflectors are available.
Comfortzone Brooder Premium Agricultural Tube Heaters

The ComfortZone Brooder

THE BURNER

  • Burners from 60,000 to 150,000 BTUH, in lengths from 12' to 52'.
  • Single and two-stage models are available.
  • Straight runs, U models, and custom configurations are available with the use of 90 and 180-degree elbow kits.
  • ComfortZone models are fitted with an operating indicator LED for quick and easy visual confirmation of operation from the ground.
  • Reliable electronic hot surface ignition.
  • Built with 100% North American-made electronic controls.
  • Natural gas and propane-fired models are built to order, with no field conversions required.
  • Continuous combustion monitoring with three to five ignition trials before 100% safety lockout.
  • Flame observation port to visually observe combustion.
  • Factory ready to accept either 24V or 120V controls.
  • Dual air-proving switches monitor combustion air and exhaust airflow for safety.
  • Totally enclosed blower motor with internal thermal overload protection. The blower motor is externally mounted for ease of accessibility and to simplify intake air connection (a 4" combustion air intake duct adapter comes standard).

THE RADIANT TUBE

  • Emitter tubes are 4" diameter, 16 gauge North American steel.
  • Emitter tubes are provided with a 20-year burnout guarantee.
  • Primary combustion tube made of high temperature, high emissivity specialty alloy.
  • Secondary tubes constructed of 16 gauge carbon steel for high emissivity.
  • Upgraded ComfortZone secondary tubes provided with a black high-temperature coating for increased emissivity.
  • Swedged tube for ease of installation - no couplers or clamps required at joints.

THE REFLECTORS

  • Highly efficient, wide-angled aluminum reflectors - engineered to reflect maximum radiant energy over the largest effective area possible.
  • Upgraded near mirror finish on all ComfortZone models for increased reflectivity and efficiency.
  • Steel hangers with suspension points for both flat and angle mounting of reflectors.
  • Side reflectors are available.

PATIO | OUTDOOR HEATERS

Patio Plus Heat for Your Patio

THE PATIO PLUS

THE HEATER

  • Black and stainless steel finishes are available.
  • Industry best 4-year warranty.
  • Manual push-button piezo ignition and 24V direct spark ignition options are available. Provides coverage over a 20' diameter (approx. 325 sq ft.).
  • Natural gas and propane-fired models are built to order, with no field conversions required.
  • A wide variety of models with versatile options for almost any application.

THE BURNER

  • 50,000 BTUH provides ample heat over a generous pattern of heat distribution.
  • Manufactured in Canada, made with quality North American materials and components.

THE REFLECTOR

  • Solid spun high polish aluminum 34" reflector for maximum heat pattern - the result of extensive testing and research.
  • Highly polished material to provide the absolute best in reflectivity.
Purple People Heater Outdoor Radiant Tube Heater

PATIO PLUS RADIANT TUBE HEATER

Outdoor Radiant Tube Heater

Equator Overhead Heat for Your Patio

THE EQUATOR

THE HEATER

  • Durable, weather-resistant black and stainless steel finishes are available.
  • Provides up to 196 sq. ft. of coverage per unit.
  • Manufactured in Canada, made with quality North American materials and components to commercial grade specifications and standards.
  • 120V plug-in models with optional manual wall switch control, with optional handheld remote control available.
  • Wall, ceiling, 4" x 4" post, and 3" dia. pole mounting hardware available.
  • Industry best 4-year warranty.
  • All units are switchable from low at 30,000 BTUH to high at 40,000 BTUH.
  • Reliable direct spark ignition system.
  • Electronic flame sensing with auto shut off in case of flame failure.
  • Available in NG or LP-fired models, no field conversion is required.
  • High-intensity ceramic burner provides exceptional coverage and spot heating.