We manufacture a wide variety of heating equipment for residential, commercial, agricultural, and industrial use. All of our products are 100% North American made, and are covered by our industry best 4 Year "No Ifs, Ands, or Buts" Guarantee

THE COMFORTZONE CARWASH

Wet and Harsh Environment Radiant Tube Heaters

The corrosion resistant stainless steel control housing, the permanently sealed moisture resistant blower motor, and the moisture resistant high temperature steel emitter tube make the Comfortzone Carwash the perfect choice for high moisture and harsh environment applications.


BUILT TO WITHSTAND WET AND DAMP ENVIRONMENTS



CarwashThe Comfortzone Carwash is the solution for cost effective, efficient heat in wet and harsh environments. Innovative features allow you to enjoy all the benefits of our premier Comfortzone line in challenging environments. The stainless steel control housing provides long lasting protection of the internal heater controls. The emitter tubes are coated alumized steel to provide years of reliable service.

NOT JUST FOR THE CARWASH

Comfortzone Carwash in Pool HouseThe Comfortzone Carwash is also used in many other industries and applications. Wherever additional corrosion protection is required, the Comfortzone Carwash is ready to serve. In industrial facilities where corrosive chemicals are present, in indoor swimming pool, in milking parlors - customers in all sectors enjoy the benefits of radiant tube heating in applications where other equipment just wouldn't hold up.

 


THE BURNER


  • Burners from 60,000 to 200,000 BTUH, in lengths from 12' to 72'.
  • Straight runs, U models, and custom configurations available with the use of 90 and 180 degree elbow kits.
  • Comfortzone Carwash models are equiped with a stainless steel control housing.
  • Single and two stage models available.
  • Comfortzone Carwash models fitted with an operating indicator LED for quick and easy visual confirmation of operation from the ground.
  • Natural gas and propane fired models built to order with no field conversions required.
  • Reliable electronic hot surface ignition.
  • Built with 100% North American made electronic controls.
  • Continuous combustion monitoring with three to five ignition trials before 100% safety lockout.
  • Totally enclosed blower motor with internal thermal overload protection. Blower motor is externally mounted for ease of accessibility and to simplify intake air connection (4" combistion air intake duct adapter comes standard).
  • Dual air proving switches monitor combustion air and exhaust airflow for safety.
  • Flame observation port to visually observe combustion.
  • Factory ready to accept either 24V or 120V controls.

THE RADIANT TUBE



  • Emitter tubes are 4" diameter, 16 gauge North American steel.
  • Primary combustion tube made of high temperature, high emissivity specialty alloy.
  • Secondary tubes constructed of 16 gauge carbon steel for high emissivity.
  • Swedged tube for ease of installation - no couplers or clamps required at joints.
  • Emitter tubes provided with a 20 year burnout guarantee.

    THE REFLECTORS



  • Highly efficient, wide angled aluminum reflectors - engineered to reflect maximum radiant energy over the largest effective area possible.
  • Upgraded near mirror finish on all Comfortzone models for increased reflectivity and efficiency.
  • Steel hangers with suspension points for both flat and angle mounting of reflectors.
  • Side reflectors and arena reflectors available.


SPECIFICATIONS AT A GLANCE

STRAIGHT MODEL SPECIFICATIONS AND CLEARANCES

 

"U" MODEL SPECIFICATIONS AND CLEARANCES

200,000 BTUH input available in NG only. Maximum input is 180,000 BTUH for LP. Clearances “below” on straight models can be reduced by 40%, 15ft. downstream of burner. 200,000 BTU not available for high altitude. For installations over 2000', all burners must be derated by 4% for every 1000' of elevation over sea level.


DOCUMENTS

Operation and Installation Instructions
Full installation/operation instructions for the Comfortzone Carwash high efficiency radiant tube heater (PDF)

Legacy Installation Instructions (units built before 2019)
Legacy Installation Instructions (units built before 2019)
Full installation/operation instructions for the Comfortzone Carwash built during or before the year 2018 (PDF)

Engineering Submittal
Quick specs, diagrams, and written specifications for the Comfortzone Carwash high efficiency radiant tube heater. (PDF)

Illustrated Parts List for Comfortzone Tube Heaters
Part numbers and illustrations of replacement parts for the Comfortzone Carwash high efficiency radiant tube heater. (PDF)

All of our products have been tested to CSA/CGA & AGA standards Intertek ETL Laboratories to 100% compliance with both Canadian and US gas code. 100% insurance company approved!



Bryz Enterprise Ltd.
Alberta, CANADA

PH. 1 403-837-9823